AI, deploy, and more
How Duaer Designer edits a workflow
Duaer Designer changes only the nodes you named, and it replies in the interface language selected in the sidebar. Attachments you reject leave the conversation.
Nodes you did not name stay as they were
Open Duaer Designer on the canvas and say which node to change, and what to change. After you save, check that node’s parameters and connections. Every other node, credential reference, and connection you did not mention stays as it was.
There is no switch for this. Duaer Designer does not rewrite the whole workflow because one node changed. When Builder drafts a new workflow it still adds nodes; you confirm on the canvas before saving. Refer to draft with AI.
Interface language
- Open Settings at the bottom of the left sidebar.
- Under Language, choose EN or Chinese.
- Return to Duaer Designer or Builder. The next reply uses the language you just chose.
The language follows the Duaer interface in this browser, not the model vendor’s default. A self-hosted instance configures Duaer Designer first.
Reject an attachment
When you reject an attachment Duaer Designer offered, later turns in that conversation do not keep it. There is no separate setting. To use the file again, provide it in a later message.
Credential descriptions
When Duaer Designer or MCP lists credentials, each row includes a preview of the description stored on that credential, up to 512 characters. The secret is not included. When two credentials share a type, write the description so the use is obvious, for example “read-only reporting database” and “alerts channel”. An empty description comes back empty.
The connection form still holds the secret fields the service requires. The description sits on the credential record so Duaer Designer and MCP can tell the rows apart. A workflow’s own description is a different field: Edit description and tags in the canvas menu, or Edit description on an exposed workflow under Instance-level Duaer.
Questions
Does Duaer Designer rewrite other nodes when it edits one?
No. Duaer Designer changes the node you named. Nodes, credential references, and connections you did not mention stay as they were.
Which language does Duaer Designer reply in?
The interface language you pick under Language in the Settings menu on the left. Choose Chinese and the next reply is in Chinese.
In this section
Build your first AI Agent in Duaer
Connect a chat model to an AI Agent in Duaer, then add tools when you need them. This page is the smallest workflow that runs.
AITurn Agents on in Duaer
In Duaer, Settings > Agents turns Agents on for the instance and shows the sandbox shared with Duaer Designer.
AIUse Chat hub in Duaer
Chat hub gives people a chat entry without the canvas. From Duaer v3 it is off by default. You can turn it on temporarily with DUAER_ENABLED_MODULES.
AIRetrieve relevant context with RAG in Duaer
Write documents into a vector store, then retrieve pieces for the model when someone asks. Duaer RAG usually has a load branch and a retrieve branch.
AIUse $fromAI for tool parameters in Duaer
In Duaer: $fromAI marks a parameter the AI Agent fills when it calls a tool. Keys may only use letters, numbers, underscores, and hyphens.
AIUnderstand why to evaluate in Duaer
In Duaer, use evaluations against known test cases so AI workflows stay reliable across inputs.
AIRun light evaluations in Duaer
In Duaer, during development run a workflow against a few known cases and compare outputs side by side before you add formal metrics.
AIUse metrics to measure quality in Duaer
In Duaer: Run an AI workflow against a test set and record scores you calculated, so you can compare versions over time.
AIFix common evaluation issues in Duaer
In Duaer, when triggers, field maps, or chat output fight the evaluation nodes, check the wiring first.
AITurn on the Duaer MCP server
In Duaer, expose the instance as an MCP server so outside clients operate workflows with permission. Turn access on in the instance first.
AIDraft Duaer workflows with AI
In Duaer, describe your goal in plain language. The builder generates or edits digital-organization nodes. You still confirm on the canvas.
AIFix failing workflows with self-healing
When a published workflow fails in production, Duaer Designer investigates, tests a fix on a copy, and sends it to Reviews. The workflow does not change until a reviewer applies the fix.
AIConnect an MCP client to Duaer
After MCP access is on in Duaer, put the connection URL and auth into the client config.
AIUse Duaer Designer on cloud
Duaer Designer on cloud is toggled in Settings and helps edit workflows.
AIManage MCP access on Duaer cloud
After you turn on MCP access on a Duaer cloud instance, outside clients can connect.
DeploySet up Duaer Designer on a self-hosted instance
Self-hosted Duaer configures Duaer Designer in its setup wizard in Settings. Sandbox and web search are optional. Prepare environment variables before startup.
DeployHost Duaer with Docker
From Duaer v3, Docker is the only supported deployment. If the instance check finds you are not in a container, it opens this page.
DeploySet up task runners as an external process in Duaer
Duaer deprecates the internal task runner. Run the runner separately, set it to external, and share DUAER_RUNNERS_AUTH_TOKEN with the launcher.
DeployConfigure binary storage with environment variables in Duaer
In Duaer, use environment variables for binary storage mode and path. The main process and workers must share one configuration.
DeployConfigure security environment variables in Duaer
In Duaer, security switches such as SSRF are configured with environment variables. From v3 the default blocked IP ranges are wider, and the check links here.
DeployConfigure digital-organization environment variables in Duaer
In Duaer, environment variables can set behavior such as the default caller policy. If the default is still any, the v3 check reports it and opens this page.
DeployManage security policies in Duaer
In Duaer, the security page in Settings points docs here for instance-level security policy entry points.
MoreCreate and edit credentials in Duaer
In Duaer, credentials are stored on the instance and protected by the encryption key. Nodes reference a credential instead of putting secrets in parameters.
MoreUse end-user credentials in Duaer
In Duaer, end-user credentials belong to the end user’s own connections. At runtime the triggerer’s account is used, not one shared secret.
MoreConfigure digital-organization settings in Duaer
In Duaer, settings include timezone, error handling, and caller policy. After v3 removes “Any workflow”, the check links to the who-can-call section.
MoreConfigure an embedded deployment in Duaer
When you embed Duaer in another product, configuration can overwrite credentials and related behavior.
MoreOpen the courses entry in Duaer
In Duaer, the Courses link in the product opens this page. It is an entry to practice notes, not a separate video school.
MoreUnderstand how items flow in Duaer
In Duaer, this chapter explains what one input looks like and how a node runs with many items.
MoreLooping docs moved in Duaer
In Duaer, legacy URL. Per-item execution and Execute Once are on the flow-logic looping page.
MoreUse the Code node instead in Duaer
In Duaer, the Function node is removed. Write JavaScript in the Code node. This URL remains so old links are not empty.
AICheck and rate what Duaer Designer delivers
Duaer Designer checks a built workflow against acceptance samples you confirm, and calls it verified only when every sample matches. After delivery, rate the reply with thumbs up or down and say what went wrong.
AISchedule a task for a Duaer digital employee
In Duaer, a digital employee task can run hourly, daily, weekly, monthly, or on a cron expression. A custom cron shows a readable sentence and the next run time.
AIInstall verified community nodes with Duaer MCP
In Duaer, a connected MCP client can install a verified community node. The client needs that permission, and it asks you before it installs.
AIConnect Databricks Embeddings in Duaer
In Duaer, Embeddings Databricks is a sub-node on an AI node. It turns text into vectors.
AISet MiniMax output length in Duaer
In Duaer, MiniMax chat-model output length is Maximum Number of Tokens under the node’s Options. The ceiling follows the model you select.
AI recipesConnect Claude to Duaer with MCP
Turn on the Duaer MCP server and add a custom connector in Claude, so Claude can find, run, and build your Duaer workflows.
AI recipesBuild a Duaer chatbot that answers from Google Drive docs
In Duaer, chunk the documents in a Google Drive folder into a vector store, then let an AI Agent retrieve the relevant pieces to answer each question.
AI recipesLet AI draft Gmail replies to new emails with Duaer
In Duaer, each new email goes to a model that writes a reply, saved as a Gmail draft in the same thread. You review and send; the AI never sends for you.
AI recipesUse DeepSeek models in a Duaer workflow
In Duaer, add your DeepSeek API key once, then plug deepseek-chat or deepseek-reasoner into an AI Agent or Basic LLM Chain.
AI recipesRun local models with Ollama in Duaer
A self-hosted Duaer can reach Ollama on the same machine or network and plug open models such as Llama and Qwen into AI Agents and RAG, keeping data on your servers.
AI recipesAuto-reply to WeCom app messages with AI in Duaer
In Duaer, when a member messages a WeCom self-built app, a model writes the reply and Duaer sends it back as an app message, optionally with memory.
AI recipesLet Claude read and write Google Sheets through a Duaer MCP server
In Duaer, expose Google Sheets read and append as MCP tools with Duaer Server Trigger, so Claude can look up and add rows on request.
AI recipesTranslate one Excel column in bulk with AI in Duaer
In Duaer, upload a spreadsheet, translate one column row by row with Basic LLM Chain, merge the translation back, and export.
MCPConnect AI tools to Duaer
Connect Claude, Claude Code, ChatGPT, Cursor, VS Code and Codex to the Duaer MCP server: the URL, how sign-in works, steps for each tool, scopes and common problems.